Mec Tech

Man's best for b.tech. eng. NITdorgapur 4m / Mech HBTI. / Thapar of the EEC?
NITDurgapur is a better option in terms of mechanical engineering is a concern. WCRC is located there, which can be useful for you. http://www.cmeri.res.in/ am a former student at the institute.
Mech Tech and Sightmark You Tube.wmv
|
|
MEC TECH INC MEC300008-1043R LOAD ASSEMBLY AMAT APPLIED $449.99 |
|
|
MEC Tech AMAT Replacement Parts Kit $1,306.67 |
|
|
MEC Tech 8330 Flame Spray Kit Parts $723.44 |
|
|
Tube Tech Recording Channel Premium/Ultra Tube Sets $89.97 |
|
|
Tube Tech Recording Channel Premium/Ultra Tube Sets $179.97 |
|
|
Tube-Tech Premium/ULTRA Tube Sets – Gold Pin JJ $83.57 |
|
|
Tube-Tech Premium/ULTRA Tube Sets – Gold Pin JJ $170.97 |
|
|
M.E.C. Tech Tapered Finger Oxide Clamp Ring MEC50005-534-1 Rev.A new 0020-33739 $812.11 |
|
|
Tube-Tech MEC 1A Recording Channel $3,561.46 |
|
|
LOT OF 3 NEW MEC TECH MEC81105-205L SPACER .26 LEXAN $24.99 |
|
|
LOT, 6 NEW MEC TECH MEC81105-209L OVERLAY, TRAY SUPPORT $49.99 |
|
|
Lot of 84 M.E.C. Tech Focus Ring MEC83305-1010A Rev.A new $406.05 |
|
|
M.E.C. Tech MEC81155-202A Extended Lower Overlay Rev.A 0020-01043 new $62.12 |
|
|
M.E.C. Tech MEC81156-200A Extended Lower Overlay Rev.A 0020-01060 new $62.12 |
|
|
M.E.C. TECH RING LOPEC MEC50008-554-5 $33.75 |
|
|
Lot of 47 MEC Tech MEC81155-204A Cap Strap EXTD New $506.05 |
|
|
Lot of 4 M.E.C. Tech MEC83305-1088L Focus Ring Rev.A new $56.05 |
|
|
NEW MEC TECH MEC86008-1051 FOCUS RING, SI, 200MM, 3.8MM $99.99 |
|
|
Lot of 6 M.E.C. Tech Extended Inner Overlay Rev.A MEC81155-201A new 0020-01044 $156.05 |
|
|
Lot of 3 M.E.C. Tech MEC83305-1088L Focus Ring Rev.A New $56.05 |
|
|
MEC Tech Process Ring 30512-1001R new $1,007.11 |
|
|
Lot of 21 MEC Tech Clip Support Spacer MEC81105-208A New $406.05 |
|
|
Production Tech MEC-082605-1-10 Cable NEW-NO BOX $39.00 |
|
|
Tube-Tech MEC 1A Recording Channel $3901.5 Tube-Tech MEC 1A Recording Channel |
|
|
Tube-Tech Mec 1A Recording Channel $4189.95 The rackmount Tube-Tech MEC 1A recording channel combines the MP 1A microphone and DI preamplifier, EQ 1A equalizer, and CL 1B optical compressor. It doesn’t get any better than that baby! The MEC 1A is designed and hand crafted to deliver the warmth of vintage quality recordings with unrivaled accuracy, purity, and realism. You couldn’t ask for a better front end for your DAW!Tube-Tech MEC 1A Recording Channel, First Take:All-tube channel strip comprising MP 1A preamp, EQ 1A equalizer, and CL 1B compressorMicrophone preamp: The microphone preamplifier consists of a microphone input transformer (with a static screen) with a step-up of +10 dB, two dual tube preamplifiers with two stepped gain switches, one with 10dB/step (coarse) and one 1dB/step (fine) giving a total gain range of +20dB to +70dB. The microphone input is provided with a switchable -20dB attenuation (PAD), switchable +48 V phantom-power and phase reverse. A highpass filter for the microphone and the DI input is switchable between off, 20 Hz and 40 Hz. For more information, check out the Tube-Tech MP 1A (# 182001)The microphone input is capable of accepting levels of up to +6 dBU (1.55V) at 40 Hz without the PAD. With the PAD switched into the circuit, the MEC 1A can be used as a unity gain line amplifier accepting levels up to +26 dBU (15.5V) at 40 Hz. The high impedance DI input is unbalanced and placed in the circuit directly after the input transformer. The gain range for this input is +10dB to +60dB. When in use, the microphone input is disabled. Equalizer: You’ll love the sound of this EQ. It performs exactly as you would want a high-end EQ to. With minimal tweaking, you can add all of the punch, polish, and air you like to make your recordings stand out. The equalizer features low and high shelving filter with a gain range of +/- 15dB, each with 6 switchable frequencies and a band filter with a gain range of +/- 20dB, 12 switchable frequencies and a bandwidth control. The shelving and the bell filters are designed around a dual tube operational amplifier. The equalizer has a separate in/out switch. For more information, check out the Tube-Tech EQ 1A (# 182019)Compressor: The compressor is the same type optocompressor found the the Tube-Tech CL 1B, the vocal compressor of choice for so many top producers and engineers. It has controls for ratio, threshold, attack and release. A switch selects between manual attack and release and fixed attack and release. With the link switch it is possible to link several units together on two independent bi- directional buses. The compressor has a separate in /out switch. In normal operation the equalizer is in front of the compressor, but a switch enables the compressor to be in front of the equalizer. For more information, check out the Tube-Tech CL 1B (# 182025)About Tube-TechFor over twenty years, Tube Tech has been one of the most prominent names in all-tube signal processing equipment. You’ll find their gear in the best recording an |
|
|
Ton mec $6 Ton mec |
|
|
Used Tube-Tech Mec 1A Recording Channel 889406624665 $3561.46 The rackmount Tube-Tech MEC 1A recording channel combines the MP 1A microphone and DI preamplifier, EQ 1A equalizer, and CL 1B optical compressor. It doesn’t get any better than that baby! The MEC 1A is designed and hand crafted to deliver the warmth of vintage quality recordings with unrivaled accuracy, purity, and realism. You couldn’t ask for a better front end for your DAW!Tube-Tech MEC 1A Recording Channel, First Take:All-tube channel strip comprising MP 1A preamp, EQ 1A equalizer, and CL 1B compressorMicrophone preamp: The microphone preamplifier consists of a microphone input transformer (with a static screen) with a step-up of +10 dB, two dual tube preamplifiers with two stepped gain switches, one with 10dB/step (coarse) and one 1dB/step (fine) giving a total gain range of +20dB to +70dB. The microphone input is provided with a switchable -20dB attenuation (PAD), switchable +48 V phantom-power and phase reverse. A highpass filter for the microphone and the DI input is switchable between off, 20 Hz and 40 Hz. For more information, check out the Tube-Tech MP 1A (# 182001)The microphone input is capable of accepting levels of up to +6 dBU (1.55V) at 40 Hz without the PAD. With the PAD switched into the circuit, the MEC 1A can be used as a unity gain line amplifier accepting levels up to +26 dBU (15.5V) at 40 Hz. The high impedance DI input is unbalanced and placed in the circuit directly after the input transformer. The gain range for this input is +10dB to +60dB. When in use, the microphone input is disabled. Equalizer: You’ll love the sound of this EQ. It performs exactly as you would want a high-end EQ to. With minimal tweaking, you can add all of the punch, polish, and air you like to make your recordings stand out. The equalizer features low and high shelving filter with a gain range of +/- 15dB, each with 6 switchable frequencies and a band filter with a gain range of +/- 20dB, 12 switchable frequencies and a bandwidth control. The shelving and the bell filters are designed around a dual tube operational amplifier. The equalizer has a separate in/out switch. For more information, check out the Tube-Tech EQ 1A (# 182019)Compressor: The compressor is the same type optocompressor found the the Tube-Tech CL 1B, the vocal compressor of choice for so many top producers and engineers. It has controls for ratio, threshold, attack and release. A switch selects between manual attack and release and fixed attack and release. With the link switch it is possible to link several units together on two independent bi- directional buses. The compressor has a separate in /out switch. In normal operation the equalizer is in front of the compressor, but a switch enables the compressor to be in front of the equalizer. For more information, check out the Tube-Tech CL 1B (# 182025)About Tube-TechFor over twenty years, Tube Tech has been one of the most prominent names in all-tube signal processing equipment. You’ll find their gear in the best recording an |
|
|
Filter(mec $5.99 Pricing subject to change. Filter(mec |
|
|
Rangetop Mec $115.49 Pricing subject to change. Rangetop Mec |
|
|
Screw Mec $2.16 Pricing subject to change. Screw Mec |
|
|
Ton ex mec $6 Ton ex mec |
|
|
Coluche L’histoire D’un Mec $12.36 Coluche L’histoire D’un Mec |
|
|
Stop (Mec) $45 Download the Stop (Mec) font for Mac or Windows in OpenType, TrueType or PostScript format. |
|
|
Isonorm™ (Mec) $45 Download the Isonorm™ (Mec) font for Mac or Windows in OpenType, TrueType or PostScript format. |
|
|
Renault® (Mec) $45 Download the Renault® (Mec) font for Mac or Windows in OpenType, TrueType or PostScript format. |
|
|
Brush (Mec) $45 Download the Brush (Mec) font for Mac or Windows in OpenType, TrueType or PostScript format. |
|
|
Vivaldi (Mec) $45 Download the Vivaldi (Mec) font for Mac or Windows in OpenType, TrueType or PostScript format. |
|
|
Mistral® (Mec) $45 Download the Mistral® (Mec) font for Mac or Windows in OpenType, TrueType or PostScript format. |



